CLNBX - TITANIUM METAL, WELDING ROD
- MSDS: CLNBX
- Manufacturer: U S ALLOY CO DBA WASHINGTON ALLOY CO
- Product Name: TITANIUM METAL, WELDING ROD
- National Stock Number: 3439-01-412-6552
Product Identification
Product ID:TITANIUM METAL, WELDING ROD
MSDS Date:01/01/2001
FSC:3439
NIIN:01-412-6552
Status Code:A
MSDS Number: CLNBX
Responsible Party
PUYALLUP, WA 98373
US
Emergency Phone: 253-848-2230
Info Phone: 206-848-2230
Cage: 0AZS7
Contractor
Telephone: 206-848-2230
Cage: 0AZS7
Ingredients
TITANIUM METAL
CAS: 7440-32-6
RTECS: XR1700000
Fraction By Weight: 85%OR MORE
WELDING ROD CONTAINS ONE OR MORE OF THE FOLLOWING ALLOY
ALUMINUM
CHROMIUM
IRON
Fraction By Weight: /P
TIN
VANADIUM
ZIRCONIUM
MOLYBDENUM
PALLADIUM
TANTALUM
Hazards
Health Hazards Acute and Chronic:INHALATION: FROM WELDING OR CUTTING.
MAY GENERATE OZONE AND/OR OXIDES OF ALLOY METALS; IRRITATION OF THE
RESPIRATORY TRACT. EXPOSURE MAY INCLUDE HEADACHE, DIZZINESS, LUNG
AND THROAT IRRITATION.
Effects of Overexposure:INHALATION: FROM WELDING OR CUTTING: IRRITATION
OF THE RESPIRATORY TRACT. EXPOSURE MAY INCLUDE HEADACHE, DIZZINESS,
LUNG AND THROAT IRRITATION.
First Aid
First Aid:EXPOSURE TO OZONE, ALLOY METAL OXIDES AND/OR FUMES: REMOVE
FROM EXPOSURE AND ADMINISTER OXYGEN. NOTIFY A PHYSICIAN.
Fire Fighting
Flash Point:WILL NOT FLASH.
Extinguishing Media:USE NATIONAL FIRE PROTECTION ASSOCIATION CLASS D
EXTINGUISHER (SALT). USE SALT OR SAND TO REDUCE OXYGEN.
Unusual Fire/Explosion Hazard:PRODUCT WILL NOT FLASH. SWARF OR FINES
MAY IGNITE BTWEEN 350C AND 400C.
Accidental Release
Spill Release Procedures:DOES NOT APPLY.
Exposure Controls
Respiratory Protection:WELDING AND CUTTING: USE WELDING FUME RESPIRATOR
(NIOSH APPROVAL NUMBER TC-21C-239). IN CONFINED AREAS, USE SUPPLIED
AIR RESPIRATORS OR HOODS. (NIOSH APPROVAL NUMBER TC-19C-72, 78,
90). IN ALL CASES R EAD THE MANUFACTURER'S INSTRUCTIONS ON
RESPIRATOR USE, FITTING, AND MAINTENANCE.
Ventilation:PROVIDE LOCAL VENTILATION WHEN WELDING OR CUTTING TO KEEP
AIRBORNE CONCENTRATIONS BELOW RECOMMENDED LEVELS.
Eye Protection:USE EYEWEAR TO PROTECT AGAINST WELDING, CUTTING.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Melt/Freeze Pt:=1700.C, ######F
Appearance and Odor:TITANIUM WELDING ROD: 0.045 INCHES IN DIA. BY 36
INCHES LONG.
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:OXIDES AND/OR FUMES WHEN WELDING OR
CUTTING.
Disposal
Waste Disposal Methods:DISPOSE OF METAL SCRAP AND SWARF IN ACCORDANCE
WITH LOCAL, STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Toxicology
Toxicological Information:THRESHOLD LIMIT VALUE: NO TLV FOR TITANIUM
METAL. INDUSTRIAL CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGENISTS
HAS CLASSIFIED TIO2 AS A NIUSANCE DUST. (10 MG/M3 TOTAL DUST, 5
MG/M3 RESPIRABLE DUST). ALU MINUM: NO TLV LISTED; IRON: NO TLV
LISTED; ACGIH HAS ISSUED A TLV FOR FE2O3: FUME 10 MG/M3;
MOLYBDENUM: NO TLV LISTED; PALLADIUM: NO TLV LISTED; TANTAIUM: 5
MG/M3; TIN: 2 MG/M3; VANADIUM:0.5 MG/M3; AC GIH HAS ISSUED A TLV
FOR V2O3 DUST = 0.5 MG/M3, FUME = 0.1 MG/M3.